Nikko Steel Kawat Las Elektroda For Hardfacing and Resurfacing - Build up HV-600B

Brosur & Katalog Produk / Brosur & Katalog Produk

0 0

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. MANUFACTURERS OF A DIVERSE RANGE OF ADVANCED WELDING CONSUMABLES SECTION 9 HV-600B LOW HYDROGEN - LOW ALLOY - HIGH EFFICIENCY HARDFACING ELECTRODE FOR BALANCED RESISTANCE TO ABRASION AND IMPACT LOADING DATA SHEET NO. 114 SPECIFICATION AWS A5.13 DIN 8555 JIS Z 3251 CLASSIFICATION EFe3 E6-UM-60-GP DF3B – 600B PRODUCT DESCRIPTION The design emphasis of the chemically basic flux is engineered to ensure that the weld metal hardness levels demanded by the specification are fully met without detracting from the toughness levels associated with this class of alloy. The basic flux containing the appropriate alloying elements and a balanced addition of iron powder is extruded onto a high purity ferritic core wire using a balance of silicates that ensures both coating strength and resistance to moisture absorption. WELDING FEATURES OF THE ELECTRODE The electrode is suitable for both AC and DC and may be used in all positions except vertical down. Arc stability is good as is slag detachability. Weld seams are smooth, evenly rippled and slightly convex in shape. The metal recovery of the electrode is some 120% with respect to weight of the core wire. APPLICATIONS AND MATERIALS TO BE WELDED On high carbon steels H V-250B should be used as a buffer layer. The weld deposit has good resistance to abrasion, under normal circumstances is crack free, and will withstand a reasonable amount of impact loading. Used to particular advantage for: Bulldozer blades, crusher jaws, bucket lips and teeth involved in earth moving and mineral crushing. Where the main wear is abrasion, but with some impact resulting from rocks and compacted minerals. Under normal circumstances the weld metal is non-machinable. WELD METAL ANALYSIS COMPOSITION % BY Wt. C Mn Si S P Cr Mo Fe MIN 0.3 0.5 - - - 4.0 - MAX 1.0 1.5 1.0 0.03 0.03 7.0 1.0 TYPICAL 0.5 1.2 0.5 0.02 0.02 4.5 0.7 Bal. WELD METAL HARDNESS (ALL WELD METAL) AS WELDED 150 0 C PRE-HEAT HRC HV 1 st Layer 50 520 2 nd Layer 55 600 3 rd Layer 58 660 Pre-heat and dilution may lower hardness on 1 st two layers but not on subsequent layers. WELDING AMPERAGE AC or DC+ Ø (mm) 2.6 3.2 4.0 5.0 MIN 65 90 140 190 MAX 90 130 180 240 OTHER DATA Electrodes that have become damp should be re-dried at 150 o C for 1 hour RELATED PRODUCTS Please contact our Technical Department for detail. WI-0304 DS114 HV-600B Rev. 1, Date 01.04.2009


  • 614 Total Views
  • 392 Website Views
  • 222 Embedded Views


  • 0 Social Shares
  • 0 Dislikes

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 8

  • 20
  • 27
  • 11
  • 1
  • 1
  • 2
  • 1
  • 3