Nikko Steel Kawat Las Elektroda Self Gas Shielding Tubular Wires Surfacing Alloys FC-34

Brosur & Katalog Produk / Brosur & Katalog Produk

0 0

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. MANUFACTURERS OF A DIVERSE RANGE OF ADVANCED WELDING CONSUMABLES SECTION 11 FC-34 SELF GAS SHIELDING FLUX AND METAL FILLED CORED WIRE FOR HARD FACING APPLICATIONS INVOLVING ABRASION AND IMPACT DATA SHEET NO. 160 SPECIFICATION DIN 8555 CLASSIFICATION MF1-350-G PRODUCT DESCRIPTION A self-shielded flux cored wire for heavy build-up and as a basis for harder finishing layer. The deposit contains small percentages of carbon, chromium, silicon, and manganese, which results a crack-free wear resistance deposit with a hardness about 34 HRC, dependent upon parent material dilutions and number of layer. It is particularly suitable for conditions of moderate abrasion and friction, coupled with resistance to heavy impact. WELDING FEATURES OF THE ELECTRODE Suitable for use on DC+ only, the strong forcefull arc is readily controllable and the high silicon content of the alloy lowers the surface tension of the molten weld pool, thus allowing ease of weaving and thus minimal dilution. Weld beads are bright and smooth and free from porosity. The slag volume is minimal and metal recovery is about 90% with respect to weight of the consumable. APPLICATIONS AND MATERIALS TO BE WELDED Designed for repairing or rebuilding of ferritic and austenitic steel. Typical applications include railroad frogs, crusher rollers and hammers, dipper gums, track pads. Also for buffer layers before hard surfacing with chromium carbide alloys. WELD METAL ANALYSIS COMPOSITION % BY Wt. MIN. MAX. TYPICAL C 0.2 0.4 0.3 Mn 1.0 1.6 1.5 Si - 1.0 0.8 S - 0.03 0.02 P - 0.02 0.01 Ni - - 0.03 Cr 0.8 1.4 1.2 Fe Bal. WELD METAL HARDNESS (ALL WELD METAL) AS WELDED 150° INTERPASS/PRE-HEAT ON C-MN STEEL STRESS RELIEVED AT 600°/FUR.COOLED ON C-MN STEEL 1 ST LAYER HRC 25 1 ST LAYER HRC 20 2 ND LAYER HRC 28 2 ND LAYER HRC 23 3 RD LAYER HRC 32 3 RD LAYER HRC 26 MAY BE CASE HARDENED WELDING AMPERAGE DC+ Ø (mm) 2.4 2.8 3.2 MIN 250 300 350 MAX 350 400 450 OTHER DATA Wires that have become damp should be re-dried at 120°C for 1 hour. RELATED PRODUCTS Please contact our Technical Department for details. WI-0304 DS160 FC-34, Rev. 1, Date 01.05.2009


  • 682 Total Views
  • 482 Website Views
  • 200 Embedded Views


  • 0 Social Shares
  • 0 Dislikes

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 6

  • 17
  • 48
  • 1
  • 5
  • 1
  • 1